New Page 1

Remember: free advertising to members as part of AWC membership. Members are encouraged to take advantage of this service. Ads will run continuously until we hear from you.

For sale: Ailerons, new original style corrugated aluminum ailerons ready to install on your Waco. Contact:

Tom Brown, Brown Aero, B716 CTP Unity, Wi. 54488, Phone 715-223-4444

For Sale:1941 UPF-7 for sale; includes original logbooks. In flying condition with current annual inspection, Asking $129,000. For details, contact csmyser@woh.rr.com.

For Sale: Hamilton Standard 2B20-15 propeller Bob Patrick 208 634-4824 email bobwaco@frontiernet.net

For Sale: 1931 WACO RNF, 110HP Scarb, Warner engine 861 TT, Vermillion red on Stitts process fabric and was fully restored in 1988. Last annual 1996, TT 1396. $72,500, OBO, trades considered. Bob (606) 248-1149 or mrp38@wwgap.net

For Sale: 1936 Waco YKS-6 NC16576. TTAF 1344 26 hours since complete restoration by Russ Harmuth to specs and condition of original factory delivery order. Log books. 245hp Jacobs R755-9, MOH by Aero Engines, HamStd 2B-20. Engine operating and maintenance manual. 'Eyeball' air vents. AmeriKing ELT, TDR Txpdr, Garmin GNC 250 GPS/COM. PS Engineering PM1000 II, Back lit panel. Instruments overhauled by Instrument Pro and screened with 'radium color' print and logo. Cessna 310 wheels & brakes, Wheel pants, Locking tail wheel,
Grimes retractable landing lights. Original nav lights. Strobes. Poly Fiber Waco vermillion w/ correct black trim. Grey velour interior. Original rear seat. Original NC registration number on tail and wings. Original operable speed brakes. O'hauled Curtiss-Reed prop available. $120,000 Cell phone: 415-250-5185 John Reed, Sausalito, CA

For Sale: UPF-7 Gross Weight Increase STC (Supplemental Type Certificate) for UPF-7's with the 275 Jake engine and Hamilton Standard 2B20-9 prop. Up your gross wt. to 2880 lbs. John Corradi, 1-888-760-8202. Email corradis@earthlink.net

For Sale: Instrument panel probably for EGC-8 but not sure. Elevators and rudder for UKC. Vertical stabilizer and rudder probably for UMF but not sure. UC-78 cowl with hardware. Upper front and rear spars for patterns, many old upper and lower ribs for patterns, all upper and lower rib jigs, fuselage formers for patterns, all for UKC. Tail wheels, forks and struts maybe for UKC. Can email photos. Best offer for any or all to a good home. Allen Johnson, cell 832-567-2111, ajohnson22@houston.rr.com.

Restoration Service: WACO Aircraft Restoration FAA Production Certificate Holder and FAA Licensed Repair Station providing dedicated/experienced work centers including: Sales, Engineering, Inspection, Steel Parts/Welding, Sheet Metal, Wood Working, Fabric Covering & Upholstery, Paint & Finish, Avionics, Aircraft Assembly, and Import/Export Services. WACO Classic Aircraft Corp. Tel: 269/565.1000, email: flywaco@wacoclassic.com, web: www.wacoclassic.com.

For Sale: Continental W-670 disassembled, new CASE liners, new bearings with carb, magnetos & oil pump. $6000, Joe Maridon, 6929 Ovida Way, Las Vegas, NV 89108 Tel. 702-658-1264

For Sale: Hydro Formed engine bump cowels. Fits standard UC-78 cowel. Bud Hays, 19994 Calumet Ave., Lowell, IN 46356. Tel. 219-696-6108.

For Sale: Windshield frames for UPF-7, both front and rear. $1000 ea. or, $2000 for set. We had molds made off original frames. Nice looking reproductions. Tom Flock 765-569-3279 or Dave Wenglarz 574-896-2353 or shop 219-828-3835.

For Sale: Brunton Aero Products streamline & round stainless steel flying wires, tie rods, & terminals. Tom Brown, Brown Aero, B716 County Road P, Unity, WI 54488. Tel: 715-223-4444.

For Sale: 1933 Waco UIC, 358 hours since total restoration in 1983. Asking $78,000. Jack Fowler, Tel: 509-448-9593

For Sale: Sensenich propeller model 90BA45 (8 hole), serial # 89577, 145 HP max; 2050 RPM max. Beautifully rebuilt by Sensenich (all paperwork) $950 (new today $1600?) Will include the hub. Loel Crawford. Tel: 423-563-7605. E-mail: fly2tn44@aol.com .

Aircraft Fabric Covering and Restorations: Contact Mike Williams at Mike's Hangar, Columbus, IN. 812-375-1954 (E-mail: mike@mikeshangar.com) . Website: http://www.mikeshangar.com

Wanted: Waco 10 fuselage blueprints No. 7 or 8. My copies from the NASM are unreadable. Rebuilding GXE and ASO, any advice appreciated. Jim Baker (832) 236-8145 or email jnlbaker2698@msn.com (email is best)

Wanted: am looking for a set of fairings for a UPF-7. I need the fairings that connect the main gear struts to the fuselage. My info is as follows: Steve Runyan, 7125 Washington Ave., University City, MO 63130, c: 314-749-1832, stevenr@sbcglobal.net

Wanted: Front & rear control sticks, push tubes, sockets, & torque tube for UPF-7. Jim Birchfield, 314 S. LaFayette Street, LaFayette, AL 36826. Tel: 334-864-8326.

Wanted: Any information and/or parts for installation of vacuum flaps on the YOC. Jim Friedline, 1325 Hwy. 362 W., Williamson, GA 30292. Tel: 770-228-5748 or E-mail: jimfriedline@earthlink.net

Wanted: UPF-7. Tom Bullion, 2421 Hawkhurst Street, Memphis, TN 38119. Tel: 901-434-9133 (work) or 901-818-9449 (home).

Wanted: Need a Waco 10 Radiator. John K. Desmond, Jr., 600 Horizon Drive, Chalfont, PA 18914. Tel: 215-997-8850 days or 215-247-0305 evenings. FAX: 215-997-8837.

Wanted: UPF-7. Fred Schmukler, 175 William Road, Massapequa, NY 11758. Tel: 516-731-2401.

Wanted: C-6 rear window inside moldings. Russell Corbin, 6230 Barton Road, N. Olmstead, OH 44070-3855. Tel: 440-734-6366 or e-mail: waco4@aol.com.

Wanted: ATO/CTO drawings, engine mount for R-975. John J. Dowd, Jr. Tel: 620-384-5152 (work). E-mail: dusty@pld.com