For Sale:  Pioneer pitot tubes for Wacos.  Exact replication of the original including fittings.  All hand made.  $250 unplated or $300 nickle plated plus shipping.  (Also make them for Hatz Biplanes).  UBF-2 tailwheel assembly.  Exact replication.  Includes shock strut, fork and 4" tailwheel hub with mounting brackets.  $2500 plus shipping.  Ken Perkins. 913-764-6949 or email:  kenvernaperkins@juno.com.  (Pictures available on request.)

For Sale:  New batch of Curtiss Reed spinners.  $75 each.  Steve L. Dawson at 262-642-3649 or email: smkdawson@netwurx.net.

For Sale:  Carburator airbox for UPF-7, stabilizer trim screws and nuts for UPF-7 and most other Waco models.  Joe Maridon at 702-658-1264. 6429 Ouida Way, Lax Vegas, NV 89108.

For Sale:  Waco Taperwing CTO, N516M, s/n AT 305.  Experimental Exhibition because of engine.  Wright 975 w/front exhaust, approx. 500 hours on engine, 60 gal. gas tank, Stearman wheels and brakes, Scott tailwheel with tow hook installed, boost tabs on ailerons, no electrical, Hamilton Standard ground adjustable 100.5" prop in good condition.  Additional pars (cylinder, valve springs, etc.), fuselage could use fabric in the near future.  $115000.  Mike Strong at 307-754-9670. P.O. Box 1180, Powell, WY 82435.

For Sale:  Waco Straightwing GXE project, N3968, s/n 1244.  Wright 975 with 0 hours, new chromed cylinders, valves, 60 gal. gas tank, Stearman wheels and brakes, Scott tailwheel, new Stits covered fuselage (yellow) and wings (silver, metal birdcage (fairings).  Extra parts including uncovered old wing, complete set of ribs for one wing.  $100,000.   Mike Strong at 307-754-9670.  P.O. Box 1180, Powell, WY 82435.

For Sale:  1946 Fairchild F-24W, NC 77632, 10 hours since complete restoration.  Lost medical.  Charles L. Mitchell, Jr. at 573-276-3206 or email: chasjackie@yahoo.com.

For Sale:  Trim screws for early Wacos.  Call Jon Nace at 574-274-3339.

For Sale:  Waco Taperwing/Straightwing BSO project, N8543, s/n A68.  Wright 760 E-2 in pieces but complete, 2B20 prop 100", prop governor, E-80 starter, UC-78 wheels and brakes, uncovered (new) taperwings.  Complete basket case EXCEPT: landing geart (outrigger type), ailerons, cabane and wing struts.  $80,000.  Mike Strong at 307-754-9670.  P.O. Box 1180, Powell, WY 82435.

For Sale:  Top dead center indicator for use on radial engines.  Use when timing magnetos, accurate to less than 1/2 degree and repeatable. Device is mechanical, no batteries.  $45.00.  Tim O'Brien at 281-543-2950 or email: seniorob@msn.com.

For Sale: UPF-7 landing gear to fuselage cuffs.  They are made oversized so you can trim to fit.  You can either weld or rivet them together like the originals. They are made for UPF-7 only.  $400 pair.  Contact David Wenglarz at 219-828-3835 (days) or 219-828-4145 (nights) or email: wings@kconline.com.

For Sale:  1929 Hamilton ground adjustable 97-3/4" prop.  Yellow tagged and ready for your 125 Kinner or Warner.  1595 hub plated at time of prop overhaul.  "0" time since overhaul.  $4800.  Paul Robertson at 586-727-7984 or email:  rob4@hughes.net

For Sale:  Attach clips for aileron slave strut; fits all aluminum four aileron Wacos.  Part# 11736, 11737, and 11684.  Made in aerospace stainless to modern specifications from original parts.  Jon Nace, A&P and aviation machinist.  574-274-3339 or email:  acenacetlc@msn.com

For Sale:  1929 Waco BSO Straightwing, NC786K.  Continental W670-220 with 16 hours since overhaul.  New wings, center section, Cleveland 8.50 X 10 wheels and brakes.  Sensenich wood prop and full electric.  I have owned a Waco since 1965 but have lost my medical. Pictures at JOYKEN@BUYLLOCH.NET.  Asking $110,000 OBO.  Ken Davis, 912-842-2771.  281 Pretoria Lane, Statesboro, GA 30461.

For Sale:  Complete system to make Townend Cowlings (speed rings) for radial engines.  Includes chuck to spin them, dies to make the cups to fit on the rocker boxes, 14 cups, 3 semi-complete cowlings (wire rolled into the edges); 1 complete cowling to fit a Continental W670.  Photos available.  Charles Sarnelli at 609-689-0090.

For Sale:  New spun aluminum dishpans.  John Gerth at 765-832-7213 (H) or 812-251-7372 (Cell).  Email at: johndonnaf7@sbcglobal.net.

For Sale:  Waco paperwork. Current paperwork and title on a Waco 10, s/n 1476, NC 6704, inclusing registration and original dataplate.  The "N" number was never reassigned so it still applies to the airplane.  Entire history of the plane and I have been in contact with the son of the original owner.  Someone purchasing the paperwork may have a Waco 10 project that is an assembly of parts.  The project could then be licensed in the Standard Category when completed.  The object it "keep the antiques flying",  meaning as original as possible.  Contact Bill Ballard at  719-638-5760 for more details.  4010 Loring Circle N., Colorado Springs, CO 80909.

For Sale:  Front and rear control stick sockets, new.  Also, front control stick grip castings for UPF-7.  Rodney Barnes at 262-567-7481.

For Sale:  Set of gear legs for Cabin Waco.  Not sure exactly which year.  They are in very good shape, rebuilt years ago.  Willl spend photos and dimensions on request.  $2500 plus shipping.  Barry Branin at 714-920-9226,  FlyWaco@Juno.com.

For Sale:  Complete set exhaust shroud for Jacobs engine.  Contact John Reed at 415-332-3490.

For Sale:  Curtiss-Reed prop.  Model 55510, 86.5".  Was on Ranger engine.  Prop yellow-tagged.  Contact John Reed at 415-332-3490.

For Sale:  1930 Waco RNF, N107Y, ser# 3277.  TTAF: 1607.  Engine SMOH: 93.  Hamilton-Standard ground adjustable prop.  Airframe: 3 year completer restoration finished in 2004.  Airframe sandblasted, inspected, repaired, epoxy coated white and coated inside with linseed oil.  Wings built from scratch with all new wood spars and ribs.  Airframe and wings covered with Ceconite and 21 coats of hand-rubbed butyrate dope.  All metal cowling. Converted to toe brakes.  New stainless steel flying wires.  Air driven generator has been overhauled and new regulator installed.  Concord battery installed.  Aircraft has nav lights and Scott tailwheel.  Certified for 3-place.  Engine: 125 hp Warner Scarab.  Angle drive electric starter.  Partial shielded wiring (Everything except spark plugs).  Interior:  Brown leather seats.  Exterior:  Silver wings, Forest Green fuselage w/ red striped surrounded by gold.  Annual due Dec 2007.  No radios.  Has internal radio antenna.  Transponder antenna and cable installed.  Asking $89,000 OBO or trade.  Contact Dick Janitall at 715-596-7324 (CO).

For Sale:  1994 Waco Classic YMF.  N4300.  Red with black and gold trim.  Deluxe interior, L & R aux fuel tanks, fully instrumented front cockpit including brakes.  full Garmin radio package including transponder, autopilot, strobe, nav, landing & taxi lights.  Many other extras too numerous to mention.  If seriously interested, contact Harry S. Gaples at 847-945-1239.  14543 W. Imperial Drive, Mettawa, IL 60048.


 

Wanted

 

Wanted:  Info and designs for converting the lockable UPF7 tailwheel assembly to a steerable tailwheel.

Any ideas on who to contact for this info?  This is for my daughter Cheri's UPF-7.  Email Michael Smyser @ masmyser@mdsystems.com.

Wanted:  Need Waco 10 Stainless Steel flying wires. Contact Steve Sachs @ 615-443-4797 or sachs@peoplepc.com

Wanted: We are finishing up a complete restoration of George Vaughn's beloved UPF-7 NC32032 and are in need of a few parts.  Looking for a Cannon Type AGB2 External Battery Plug and mounting plate original for a CAA UPF-7, 1 face cover for a Pioneer Type 1820-1-A Compass (pre war B-16), a set of  factory original UPF-7 seat cushions to copy, Drawings for Part 22496 and 22577 rubber wing walk molding, a sample of the original wing walk rubber mat, an airworthy Curtiss Reed 55501, and a source for the Chevrolet accelerator boot used on the firewall for the throttle linkage and the oval shaped firewall grommets.

Karl Engelskirger (216) 246-8984 gaairracers@aol.com www.flynoma.org

Wanted:  I need help with my BSO.  I would like to put a 5-6-7 in place of 5-6-5.  Then I want to convert the BSO to a CSO, then to a CTO.  I have started the paperwork with the FAA.  Ken Pietsch, P.O Box 356, Burlington, NDv58722.  Phone at 701-725-4312(W) or 701-725-4800 (H).

Wanted:  Any and all fairings (even beat up fairings) for the ZQC-6 Model Waco, S/N 5000.  For use or repair in completing a static display project.  Contact Bob Cameron, 102 Wickstrom Rd., Whitehorse, Yukon, Canada, YIA 6N2.  867-667-2760 or email yukoncamerons@klondiker.com

Wanted:  We are restoring a Waco 10 with a Hisso-Suiza engine.  We need Hisso parts for E or E2 including: magneto drives, magnetos, Stromberg NA-D4 carburetor, and a water pump.  Contact Bill Krema at 715-373-2830 or email dbkrema@centurytel.net

Wanted:  Hayes brake shoe as used on UPF-7s.  Would take a complete assembly including back plates if someone has converted to newer style brakes.  Contact Bud Bushway at 802-765-4070 or email wacovt@aol.com